Dicholorbenzyl alkyl ether homologs as retention index markers and internal standards for the analysis of environmental samples using capillary gas chromatography

A homologous series of 2,4-dichlorobenzyl alkyl ethers (DCBEs) have been synthesized and purified for use as retention index calibrants and internal standards. They are stable, sensitive to ECD and FID and ideal for GC-MS, with base peaks at m/z 159/161. The retention index calibration against the n-alkanes for a linear temperature program (LTP) series is given and recommendations made for the most suitable members of the DCBE series for use as internal standards in organochlorine (OC) residue analysis.     

A Large Volume Injection Procedure for GC-MS Determination of PAHs and PCBs

A simple on-column injection system for large volume of liquid samples for the GC-MS determination of traces of PAHs and PCBs has been investigated. A deactivated fused silica capillary 20 m × 0.53 mm I.D. and 2 meters of an HP5 column (0.53 mm,1 m film thickness) were used as retention gaps. Injection volumes of 80 L for PAHs and 90 L for PCBs, allow determination of 5–50 ng L^–1 PAHs and 11–44 ng L^–1 PCBs in hexane solution with an RSD of < 10%. The method has been used for the determination of PCBs and PAHs in soil sample.     

Compehensive two-dimensional gas chromatography (GC×GC) and its applicability to the characterization of complex (petrochemical) mixtures

In general, petrochemical products contain only a limited number of chemical classes of compounds (sample dimensionality). The enormous number of individual components within these classes, however, soon puts limitations upon a single chromatographic technique when it comes to adequate characterization of these products. Comprehensive two-dimensional gas chromatography (GC×GC) clearly opens the possibility of estimating the composition of hydrocarbon mixtures in a far more detailed fashion than hitherto possible. Although the emphasis of papers of GCxGC thus far almost exclusively applies to the unsurpassed peak-capacity, in the oil industry there is a need for characterization, rather than for analyzing all the individual compounds. In principle a GCxGC system can provide an almost perfect match between its intrinsic properties and the dimensionality of oil samples. To establish the applicability of GCxGC towards petrochemical analytical challenges, a commercially aavailable prototype instrument was subjected to an exhaustive characterization of a typical hydrocarbon precess stream and a fast characterization of a light gas oil. Although there are no fundamental limitations towards the quantitative aspects of a GCxGC system, this paper confines itself to qualitative results only. Quantitative aspects of GCxGC will be published in a forthcoming paper.     

Practical capillary gas chromatography—a systematic approach

Capillary gc is now rapidly expanding. Naturally, initiation is most often attempted on the basis of the experience acquired with packed columns. However, such an extrapolation is successful only if a number of essential peculiarities of capillary gc are considered. Based on practical examples this paper discusses six essential details: 1) design and maintenance of the gas flow paths, 2) the greatly increased importance of sampling technique, which should not be confined just to stream splitting, 3) the problems in quantitative analysis arising from small sample size, 4) specific sources of trouble related to small amounts of liquid phase, 5) specific arguments for the choice of the carrier gas, clearly pointing to hydrogen as the ideal carrier and, 6) the different way to approach column production. Figures for all selected examples are given.     

Determination of gold in geological samples by x-ray fluorescence spectrometry after extraction with tributyl phosphate

The behaviour of gold and elements impeding its x-ray fluorescence spectrometric (XRF) determination, namely zinc, lead and arsenic, was studied during their extraction from hydrochloric acid, nitric acid, and aqua regia solutions using tributyl phosphate as a solid extractant [SE(TBP)]. Extraction of gold from pulps after aqua regia leaching was found to be the most favourable approach for the quantitative and selective recovery of gold. The gold distribution ratio, D_Au, is ca. 10⁴ ml g^?1. For extraction from hydrochloric acid solutions the D_Au value also exceeds 10⁴ in the whole range of gold concentrations studied (10^?8?10^?4 M), but it decreases substantially with increasing extraction temperature, from 5 × 10⁵ ml g^?1 at 20°C to 9 × 10³ ml g^?1 at 70°C. An anomalously high distribution ratio of lead, D_Pb ≈ 10³ ml g^?1, was observed during extraction from hydrochloric solutions in the presence of chlorine. This could be explained by the formation of the chloro complexes of lead(IV). An XRF method for the determination of gold in natural samples was developed, which includes back-extraction of gold from SE(TBP) using a hot 0.025 M thiourea solution, providing a thin sample layer for secondary XRF. For 25 g of sample material the limit of determination is 10 ng g^?1 (10^?6%). The accuracy of the technique was checked using different reference materials. The results agreed within 10%.     

Use of non-aqueous capillary electrophoresis for the quality control of commercial saffron samples

A non-aqueous capillary electrophoresis (NACE) method for quantifying the seven crocin metabolites that are the major biologically active ingredients of saffron was developed. Separation is done by using a fused silica capillary filled with a 12.5 mM H3BO3/37.5 mM sodium tetraborate methanolic solution as background electrolyte. The results obtained were compared with the total index "safranal value", widely used as a quality measure of saffron products. The comparison revealed that the proposed NACE method provides useful information not obtained in the safranal value. Infact, samples with a similar safranal value can contain crocin metabolites in different concentrations and relative proportions. This new method is very useful for quality control in commercial saffron samples.     

Separation of L-DOPA and four metabolites in plasma using a porous graphitic carbon column in capillary liquid chromatography

Summary A sensitive HPLC method with marbofloxacin (MAR) as internal standard and fluorescence detection is described for the analysis of ofloxacin (OFL) enantiomers in plasma samples. Plasma samples were prepared by adding phosphate buffer (pH 7.4, 0.1m), then extracted with trichloromethane.S-OFL,R-OFL, and the internal standard were separated on a reversed-phase column with water-methanol, 85.5∶14.5, as mobile phase. The concentrations ofS-OFL andR-OFL eluting from the column (retention times 7.5 and 8.7 min, respectively) were monitored by fluorescence detection withλ _ex = 331 andλ _em = 488 nm. The detection and quantitation limits were 10 and 20 ng mL⁻¹, respectively, forS-OFL and 11 and 21 ng mL⁻¹ forR-OFL. Response was linearly related to concentration in the range 10 to 2500 ng mL⁻¹. Recovery was close to 93% for both compounds. The method was applied to determination of the enantiomers of OFL in plasma samples collected during pharmacokinetic studies.     

Strukturuntersuchungen an naßersponnenen Polyacrylnitrilfasern nach der Gefriertrocknung

Zusammenfassung An unterschiedlich verstreckten und hydrothermisch nachbehandelten, danach gefriergetrockneten Polyacrylnitril-Gelfasern (PAN) wurden Messungen der Röntgenkleinwinkelstreuung (RKWS), Röntgenweitwinkelstreuung (RWWS) und Tieftemperatur-Gassorption (TTGA) durchgeführt. Die RKWS-Messungen zeigen, daß sowohl in den isotropen als auch in den orientierten Proben eine exponentialstatistische Verteilung der Form und Größe der Inhomogenitäten (Hohlräume, Cluster) vorliegt, welche durch die Kohärenzlängel _c bestimmt wird. Eine erhöhte Röntgenabsorption wurde bei den verstreckten Proben festgestellt. Die Analyse der aus der Kohärenzlänge und den Volumsanteilen der Phasen berechneten charakteristischen RK WS-Parameter (z.B. innere Oberfläche, Durchschußlänge) ergibt, daß jede Behandlung der Gelfasern eine Zu- oder Abnahme der etwa gleich großen Hohlräume verursacht (nucleotic change). Das relative Ausmaß dieser Veränderungen wird besprochen.Der Vergleich mit den Ergebnissen der TTGA an den gleichen Fasern zeigt, daß die Tendenzen bei der spezifischen Oberfläche und dem Porenvolumen (Zu- bzw. Abnahme) bei beiden Methoden annähernd gleich sind. Die Absolutwerte des Hohlraumvolumens unterscheiden sich aber z.T. um den Faktor 40. Dies führt zur Schlußfolgerung, daß mit der RK WS Faserbereiche als Hohlräume erfaßt werden, die bei der TTGA nicht angezeigt werden, weil sie für das Meßgas unzugänglich sind.

---

Structural studies on wet-spun freeze-dried polyacrylonitrile fibers

Summary Polyacrylonitrile fibers (PAN) were drawn to different extents, hydrothermally aftertreated, and at last freeze-dried. The products were studied by small angle X-ray scattering (SAXS), wide angle X-ray scattering (WAXS), and low temperature gassorption (LTGS). The SAXS data show that the shape and the size of the inhomogeneities (voids, clusters) have an exponential statistical distribution determined by the correlation lengthl _c, both in the isotropic fibers and in the fiber-oriented ones. It has also been observed that stretching always causes a higher X-ray absorption. An analysis of the characteristic SAXS parameters (e.g., internal surface, mean chord length), which were calculated from the correlation length and the volume fractions of the phases, evidences that in all samples an augmentation or diminution of the number of the voids with nearly the same shape and size takes place (nucleotic change). Its relative number has been pointed out.Comparison with the results of the LTGS investigations at the same fibers shows that the tendencies of the specific surface and porosity (increase, decrease) are approximately the same with both methods. However, the absolute values of void volume differ in some cases by the factor 40. This leads to the conclusion that the SAXS method records domains of these fibers as voids which are not registered by LTGS (voids not accessible for the gas).

Herrn em.o.Univ. Prof. Dr.Josef Schurz zum 70. Geburtstag gewidmet     

Simultaneous quantitative measurement of a new platelet activating factor antagonist (BN 50730) and its two main metabolites in human plasma and urine by LC-MS

Summary A simple and sensitive assay has been developed for the quantitative measurement of a new platelet activating factor antagonist (BN50730), and its two main metabolites (BN50727 and BN50922), at the picomole level in human plasma and urine. The three compounds of interest and the internal standard (BN50765) were measured by combined LC-negative chemical ionization MS. A simple solid-liquid extraction procedure was used to isolate the parent drug and the two metabolites. The MS was tuned to monitor the intense ionm/z 333 generated in the ion source by a dissociative capture process. The assay was on 1 ml plasma or 0.1 ml urine and the quantitation limit was calculated as 1 ng·ml^–1. The very low relative standard deviations and mean percentages of error calculated for within-day or between-day repeatability assays demonstrate the ruggedness of the technique for routine determination in biological fluids. Some preliminary results on the pharmacokinetics of the parent drug and its two main metabolites illustrate the applicability of this method.     

Adsorptive Stripping Voltammetric Determination of Ultra Trace of Zinc and Lead with Carbidopa as Complexing Agent in Food and Water Samples

In the present work, the cathodic stripping voltammetric methodology using a hanging mercury drop electrode was described for simultaneous determination of lead and zinc in different real samples. The method is based on adsorption of metal ions on mercury electrode using carbidopa as a suitable complexing agent. The potential was scanned to the negative direction and the differential pulse stripping voltammograms were recorded. Optimal conditions were found to be: accumulation time; 70 s, accumulation potential; 50 mV versus Ag/AgCl, scan rate; 40 mV s^?1, supporting electrolyte; 0.01 M ammonia buffer at pH 8.5, and concentration of carbidopa; 8.0 μM. The relationship between the peak current versus concentration was linear over the range of 0.1–210 and 0.2–170 nM for lead and zinc, respectively. The detection limits are 0.09 and 0.15 nM for lead and zinc ions respectively. The relative standard deviations at a concentration level of 70 nM of both metal ions are found 1.08 and 1.24% for lead and zinc ions respectively.